Bruce 

I use the PCF below to plot the PP Count. Is it possible to make the indicator plot only if Vol surge is > by 1.5 times the 30 day avg 

If V / AVGV30 > 1.5 Then plot below 

You could just put that whole fomula between the commas in the following.

IIF(V > 1.5 * AVGV30, , 0)

To get:

IIF(V > 1.5 * AVGV30, IIF(C > C1 AND V > 1.5 * AVGV30, IIF(C1 < C2 AND V <= V1, 0, IIF(C2 < C3 AND V <= V2, 1, IIF(C3 < C4 AND V <= V3, 2, IIF(C4 < C5 AND V <= V4, 3, IIF(C5 < C6 AND V <= V5, 4, IIF(C6 < C7 AND V <= V6, 5, IIF(C7 < C8 AND V <= V7, 6, IIF(C8 < C9 AND V <= V8, 7, IIF(C9 < C10 AND V <= V9, 8, IIF(C10 < C11 AND V <= V10, 9, IIF(C11 < C12 AND V <= V11, 10, IIF(C12 < C13 AND V <= V12, 11, IIF(C13 < C14 AND V <= V13, 12, IIF(C14 < C15 AND V <= V14, 13, IIF(C15 < C16 AND V <= V15, 14, IIF(C16 < C17 AND V <= V16, 15, IIF(C17 < C18 AND V <= V17, 16, IIF(C18 < C19 AND V <= V18, 17, IIF(C19 < C20 AND V <= V19, 18, IIF(C20 < C21 AND V <= V20, 19, IIF(C21 < C22 AND V <= V21, 20, IIF(C22 < C23 AND V <= V22, 21, IIF(C23 < C24 AND V <= V23, 22, IIF(C24 < C25 AND V <= V24, 23, IIF(C25 < C26 AND V <= V25, 24, IIF(C26 < C27 AND V <= V26, 25, IIF(C27 < C28 AND V <= V27, 26, IIF(C28 < C29 AND V <= V28, 27, IIF(C29 < C30 AND V <= V29, 28, IIF(C30 < C31 AND V <= V30, 29, IIF(C31 < C32 AND V <= V31, 30, IIF(C32 < C33 AND V <= V32, 31, IIF(C33 < C34 AND V <= V33, 32, IIF(C34 < C35 AND V <= V34, 33, IIF(C35 < C36 AND V <= V35, 34, IIF(C36 < C37 AND V <= V36, 35, IIF(C37 < C38 AND V <= V37, 36, IIF(C38 < C39 AND V <= V38, 37, IIF(C39 < C40 AND V <= V39, 38, IIF(C40 < C41 AND V <= V40, 39, IIF(C41 < C42 AND V <= V41, 40, IIF(C42 < C43 AND V <= V42, 41, IIF(C43 < C44 AND V <= V43, 42, IIF(C44 < C45 AND V <= V44, 43, IIF(C45 < C46 AND V <= V45, 44, IIF(C46 < C47 AND V <= V46, 45, IIF(C47 < C48 AND V <= V47, 46, IIF(C48 < C49 AND V <= V48, 47, IIF(C49 < C50 AND V <= V49, 48, IIF(C50 < C51 AND V <= V50, 49, IIF(C51 < C52 AND V <= V51, 50, IIF(C52 < C53 AND V <= V52, 51, IIF(C53 < C54 AND V <= V53, 52, IIF(C54 < C55 AND V <= V54, 53, IIF(C55 < C56 AND V <= V55, 54, IIF(C56 < C57 AND V <= V56, 55, IIF(C57 < C58 AND V <= V57, 56, IIF(C58 < C59 AND V <= V58, 57, IIF(C59 < C60 AND V <= V59, 58, IIF(C60 < C61 AND V <= V60, 59, IIF(C61 < C62 AND V <= V61, 60, IIF(C62 < C63 AND V <= V62, 61, IIF(C63 < C64 AND V <= V63, 62, 63))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))), 0), 0)

PP Count?

My money is on Pocket Pivots. 

Just thought of a new game ... post a PCF and have folks figure out what it does. LOL.

Barista!

Never heard of Pocket Pivots, but Googling...

• It starts with PP
• thnkbigr mentions Volume
• Other than price, Pocket Pivots also use Volume

Bruce, tell me what I've won!

Yes, the PP in this case stands for Pocket Pivot.

Not bad considering I never heard of Pocket Pivots a half-hour ago. 

Barista ... make it a double!

PP are great buy points in leading uptrending stocks. 

They offer a lower entry level as the stcoks is resuming higher after a consolidation phase. You don;t have to wait for a breakout to a new high like CANSLIM and also it offers a lower risk entry level in case the signal fails. 

Of course since you are buying at the earliest sign of resumption of accumulation yo may exprience more failures then waiting to see multiple high volume accumulation days on the right side of the base which is what O'Neil suggest as more confirmation of buying by the big players

But in my opinion the standrad base breakouts have been failing in the last few years so PP are far better 

Bruce 

If I have multiple indicatprs in the same pane in TC how do I make one be the front and be on top of all others 

In SF we can right click and select bring to the front so if two indicators are overlapping each other the one in front will show

In this case I actually want to make Price be the front in TC. Is that possible

thanks   

TC2000 just plots the indicators on the chart going from left to right with each indicator plotting overtop all of the previous indicators.

There isn't a built in way to shift the indicators left and right besides removing and re-adding indicators.

If what you want is price to be on top, you would generally need to do this by adding a second price plot to the same pane and scale as the main price indicator.

Re: Pocket Pivots, let's take a look at an amazing performer over the last year, the biotech stock IMMU. 

Five days ago on August 17, 2017, IMMU shows a Pocket Pivot and continues with Pocket Pivots on each subsequent days thru today.

Had one entered on the Close on August 17, the return thru now (10:21 EST) would be 28.57 percent.

My request Bruce...

Please tweet the Pocket Pivot PCF to indicate no Pocket Pivot yesterday and a Pocket Pivot today.

Forgot to say, I used the Pocket Pivot that included volume.  See below:

IIF(V > 1.5 * AVGV30, IIF(C > C1 AND V > 1.5 * AVGV30, IIF(C1 < C2 AND V <= V1, 0, IIF(C2 < C3 AND V <= V2, 1, IIF(C3 < C4 AND V <= V3, 2, IIF(C4 < C5 AND V <= V4, 3, IIF(C5 < C6 AND V <= V5, 4, IIF(C6 < C7 AND V <= V6, 5, IIF(C7 < C8 AND V <= V7, 6, IIF(C8 < C9 AND V <= V8, 7, IIF(C9 < C10 AND V <= V9, 8, IIF(C10 < C11 AND V <= V10, 9, IIF(C11 < C12 AND V <= V11, 10, IIF(C12 < C13 AND V <= V12, 11, IIF(C13 < C14 AND V <= V13, 12, IIF(C14 < C15 AND V <= V14, 13, IIF(C15 < C16 AND V <= V15, 14, IIF(C16 < C17 AND V <= V16, 15, IIF(C17 < C18 AND V <= V17, 16, IIF(C18 < C19 AND V <= V18, 17, IIF(C19 < C20 AND V <= V19, 18, IIF(C20 < C21 AND V <= V20, 19, IIF(C21 < C22 AND V <= V21, 20, IIF(C22 < C23 AND V <= V22, 21, IIF(C23 < C24 AND V <= V23, 22, IIF(C24 < C25 AND V <= V24, 23, IIF(C25 < C26 AND V <= V25, 24, IIF(C26 < C27 AND V <= V26, 25, IIF(C27 < C28 AND V <= V27, 26, IIF(C28 < C29 AND V <= V28, 27, IIF(C29 < C30 AND V <= V29, 28, IIF(C30 < C31 AND V <= V30, 29, IIF(C31 < C32 AND V <= V31, 30, IIF(C32 < C33 AND V <= V32, 31, IIF(C33 < C34 AND V <= V33, 32, IIF(C34 < C35 AND V <= V34, 33, IIF(C35 < C36 AND V <= V35, 34, IIF(C36 < C37 AND V <= V36, 35, IIF(C37 < C38 AND V <= V37, 36, IIF(C38 < C39 AND V <= V38, 37, IIF(C39 < C40 AND V <= V39, 38, IIF(C40 < C41 AND V <= V40, 39, IIF(C41 < C42 AND V <= V41, 40, IIF(C42 < C43 AND V <= V42, 41, IIF(C43 < C44 AND V <= V43, 42, IIF(C44 < C45 AND V <= V44, 43, IIF(C45 < C46 AND V <= V45, 44, IIF(C46 < C47 AND V <= V46, 45, IIF(C47 < C48 AND V <= V47, 46, IIF(C48 < C49 AND V <= V48, 47, IIF(C49 < C50 AND V <= V49, 48, IIF(C50 < C51 AND V <= V50, 49, IIF(C51 < C52 AND V <= V51, 50, IIF(C52 < C53 AND V <= V52, 51, IIF(C53 < C54 AND V <= V53, 52, IIF(C54 < C55 AND V <= V54, 53, IIF(C55 < C56 AND V <= V55, 54, IIF(C56 < C57 AND V <= V56, 55, IIF(C57 < C58 AND V <= V57, 56, IIF(C58 < C59 AND V <= V58, 57, IIF(C59 < C60 AND V <= V59, 58, IIF(C60 < C61 AND V <= V60, 59, IIF(C61 < C62 AND V <= V61, 60, IIF(C62 < C63 AND V <= V62, 61, IIF(C63 < C64 AND V <= V63, 62, 63))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))), 0), 0)

Please try the following.

IIF(XUP(IIF(V > 1.5 * AVGV30, IIF(C > C1 AND V > 1.5 * AVGV30, IIF(C1 < C2 AND V <= V1, 0, IIF(C2 < C3 AND V <= V2, 1, IIF(C3 < C4 AND V <= V3, 2, IIF(C4 < C5 AND V <= V4, 3, IIF(C5 < C6 AND V <= V5, 4, IIF(C6 < C7 AND V <= V6, 5, IIF(C7 < C8 AND V <= V7, 6, IIF(C8 < C9 AND V <= V8, 7, IIF(C9 < C10 AND V <= V9, 8, IIF(C10 < C11 AND V <= V10, 9, IIF(C11 < C12 AND V <= V11, 10, IIF(C12 < C13 AND V <= V12, 11, IIF(C13 < C14 AND V <= V13, 12, IIF(C14 < C15 AND V <= V14, 13, IIF(C15 < C16 AND V <= V15, 14, IIF(C16 < C17 AND V <= V16, 15, IIF(C17 < C18 AND V <= V17, 16, IIF(C18 < C19 AND V <= V18, 17, IIF(C19 < C20 AND V <= V19, 18, IIF(C20 < C21 AND V <= V20, 19, IIF(C21 < C22 AND V <= V21, 20, IIF(C22 < C23 AND V <= V22, 21, IIF(C23 < C24 AND V <= V23, 22, IIF(C24 < C25 AND V <= V24, 23, IIF(C25 < C26 AND V <= V25, 24, IIF(C26 < C27 AND V <= V26, 25, IIF(C27 < C28 AND V <= V27, 26, IIF(C28 < C29 AND V <= V28, 27, IIF(C29 < C30 AND V <= V29, 28, IIF(C30 < C31 AND V <= V30, 29, IIF(C31 < C32 AND V <= V31, 30, IIF(C32 < C33 AND V <= V32, 31, IIF(C33 < C34 AND V <= V33, 32, IIF(C34 < C35 AND V <= V34, 33, IIF(C35 < C36 AND V <= V35, 34, IIF(C36 < C37 AND V <= V36, 35, IIF(C37 < C38 AND V <= V37, 36, IIF(C38 < C39 AND V <= V38, 37, IIF(C39 < C40 AND V <= V39, 38, IIF(C40 < C41 AND V <= V40, 39, IIF(C41 < C42 AND V <= V41, 40, IIF(C42 < C43 AND V <= V42, 41, IIF(C43 < C44 AND V <= V43, 42, IIF(C44 < C45 AND V <= V44, 43, IIF(C45 < C46 AND V <= V45, 44, IIF(C46 < C47 AND V <= V46, 45, IIF(C47 < C48 AND V <= V47, 46, IIF(C48 < C49 AND V <= V48, 47, IIF(C49 < C50 AND V <= V49, 48, IIF(C50 < C51 AND V <= V50, 49, IIF(C51 < C52 AND V <= V51, 50, IIF(C52 < C53 AND V <= V52, 51, IIF(C53 < C54 AND V <= V53, 52, IIF(C54 < C55 AND V <= V54, 53, IIF(C55 < C56 AND V <= V55, 54, IIF(C56 < C57 AND V <= V56, 55, IIF(C57 < C58 AND V <= V57, 56, IIF(C58 < C59 AND V <= V58, 57, IIF(C59 < C60 AND V <= V59, 58, IIF(C60 < C61 AND V <= V60, 59, IIF(C61 < C62 AND V <= V61, 60, IIF(C62 < C63 AND V <= V62, 61, IIF(C63 < C64 AND V <= V63, 62, 63))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))), 0), 0), 1), IIF(V > 1.5 * AVGV30, IIF(C > C1 AND V > 1.5 * AVGV30, IIF(C1 < C2 AND V <= V1, 0, IIF(C2 < C3 AND V <= V2, 1, IIF(C3 < C4 AND V <= V3, 2, IIF(C4 < C5 AND V <= V4, 3, IIF(C5 < C6 AND V <= V5, 4, IIF(C6 < C7 AND V <= V6, 5, IIF(C7 < C8 AND V <= V7, 6, IIF(C8 < C9 AND V <= V8, 7, IIF(C9 < C10 AND V <= V9, 8, IIF(C10 < C11 AND V <= V10, 9, IIF(C11 < C12 AND V <= V11, 10, IIF(C12 < C13 AND V <= V12, 11, IIF(C13 < C14 AND V <= V13, 12, IIF(C14 < C15 AND V <= V14, 13, IIF(C15 < C16 AND V <= V15, 14, IIF(C16 < C17 AND V <= V16, 15, IIF(C17 < C18 AND V <= V17, 16, IIF(C18 < C19 AND V <= V18, 17, IIF(C19 < C20 AND V <= V19, 18, IIF(C20 < C21 AND V <= V20, 19, IIF(C21 < C22 AND V <= V21, 20, IIF(C22 < C23 AND V <= V22, 21, IIF(C23 < C24 AND V <= V23, 22, IIF(C24 < C25 AND V <= V24, 23, IIF(C25 < C26 AND V <= V25, 24, IIF(C26 < C27 AND V <= V26, 25, IIF(C27 < C28 AND V <= V27, 26, IIF(C28 < C29 AND V <= V28, 27, IIF(C29 < C30 AND V <= V29, 28, IIF(C30 < C31 AND V <= V30, 29, IIF(C31 < C32 AND V <= V31, 30, IIF(C32 < C33 AND V <= V32, 31, IIF(C33 < C34 AND V <= V33, 32, IIF(C34 < C35 AND V <= V34, 33, IIF(C35 < C36 AND V <= V35, 34, IIF(C36 < C37 AND V <= V36, 35, IIF(C37 < C38 AND V <= V37, 36, IIF(C38 < C39 AND V <= V38, 37, IIF(C39 < C40 AND V <= V39, 38, IIF(C40 < C41 AND V <= V40, 39, IIF(C41 < C42 AND V <= V41, 40, IIF(C42 < C43 AND V <= V42, 41, IIF(C43 < C44 AND V <= V43, 42, IIF(C44 < C45 AND V <= V44, 43, IIF(C45 < C46 AND V <= V45, 44, IIF(C46 < C47 AND V <= V46, 45, IIF(C47 < C48 AND V <= V47, 46, IIF(C48 < C49 AND V <= V48, 47, IIF(C49 < C50 AND V <= V49, 48, IIF(C50 < C51 AND V <= V50, 49, IIF(C51 < C52 AND V <= V51, 50, IIF(C52 < C53 AND V <= V52, 51, IIF(C53 < C54 AND V <= V53, 52, IIF(C54 < C55 AND V <= V54, 53, IIF(C55 < C56 AND V <= V55, 54, IIF(C56 < C57 AND V <= V56, 55, IIF(C57 < C58 AND V <= V57, 56, IIF(C58 < C59 AND V <= V58, 57, IIF(C59 < C60 AND V <= V59, 58, IIF(C60 < C61 AND V <= V60, 59, IIF(C61 < C62 AND V <= V61, 60, IIF(C62 < C63 AND V <= V62, 61, IIF(C63 < C64 AND V <= V63, 62, 63))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))), 0), 0), 0)

I am using the Pocket Pivot PCF without volume as below:

IIF(C > C1, IIF(C1 < C2 AND V <= V1, 0, IIF(C2 < C3 AND V <= V2, 1, IIF(C3 < C4 AND V <= V3, 2, IIF(C4 < C5 AND V <= V4, 3, IIF(C5 < C6 AND V <= V5, 4, IIF(C6 < C7 AND V <= V6, 5, IIF(C7 < C8 AND V <= V7, 6, IIF(C8 < C9 AND V <= V8, 7, IIF(C9 < C10 AND V <= V9, 8, IIF(C10 < C11 AND V <= V10, 9, IIF(C11 < C12 AND V <= V11, 10, IIF(C12 < C13 AND V <= V12, 11, IIF(C13 < C14 AND V <= V13, 12, IIF(C14 < C15 AND V <= V14, 13, IIF(C15 < C16 AND V <= V15, 14, IIF(C16 < C17 AND V <= V16, 15, IIF(C17 < C18 AND V <= V17, 16, IIF(C18 < C19 AND V <= V18, 17, IIF(C19 < C20 AND V <= V19, 18, IIF(C20 < C21 AND V <= V20, 19, IIF(C21 < C22 AND V <= V21, 20, IIF(C22 < C23 AND V <= V22, 21, IIF(C23 < C24 AND V <= V23, 22, IIF(C24 < C25 AND V <= V24, 23, IIF(C25 < C26 AND V <= V25, 24, IIF(C26 < C27 AND V <= V26, 25, IIF(C27 < C28 AND V <= V27, 26, IIF(C28 < C29 AND V <= V28, 27, IIF(C29 < C30 AND V <= V29, 28, IIF(C30 < C31 AND V <= V30, 29, IIF(C31 < C32 AND V <= V31, 30, IIF(C32 < C33 AND V <= V32, 31, IIF(C33 < C34 AND V <= V33, 32, IIF(C34 < C35 AND V <= V34, 33, IIF(C35 < C36 AND V <= V35, 34, IIF(C36 < C37 AND V <= V36, 35, IIF(C37 < C38 AND V <= V37, 36, IIF(C38 < C39 AND V <= V38, 37, IIF(C39 < C40 AND V <= V39, 38, IIF(C40 < C41 AND V <= V40, 39, IIF(C41 < C42 AND V <= V41, 40, IIF(C42 < C43 AND V <= V42, 41, IIF(C43 < C44 AND V <= V43, 42, IIF(C44 < C45 AND V <= V44, 43, IIF(C45 < C46 AND V <= V45, 44, IIF(C46 < C47 AND V <= V46, 45, IIF(C47 < C48 AND V <= V47, 46, IIF(C48 < C49 AND V <= V48, 47, IIF(C49 < C50 AND V <= V49, 48, IIF(C50 < C51 AND V <= V50, 49, IIF(C51 < C52 AND V <= V51, 50, IIF(C52 < C53 AND V <= V52, 51, IIF(C53 < C54 AND V <= V53, 52, IIF(C54 < C55 AND V <= V54, 53, IIF(C55 < C56 AND V <= V55, 54, IIF(C56 < C57 AND V <= V56, 55, IIF(C57 < C58 AND V <= V57, 56, IIF(C58 < C59 AND V <= V58, 57, IIF(C59 < C60 AND V <= V59, 58, IIF(C60 < C61 AND V <= V60, 59, IIF(C61 < C62 AND V <= V61, 60, IIF(C62 < C63 AND V <= V62, 61, IIF(C63 < C64 AND V <= V63, 62, 63))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))), 0)
 

When I add Pocket Pivot as a Column, I'm using a 5-minute Timeframe which matches the minimum 5-minute Refresh Rate.

The Column produces either zeros or numerical values which can vary from one stock to another.

Please explain the meaning of these numerical values, Bruce.

A Pocket Pivot is an up day with higher volume than all of the down days over the previous 10 bars.

You could define the Pocket Pivot as an upday with higher volume than all of the down days over the previous x bars instead.

The PP Count indicator is designed to return x.

The highest Pocket Pivot value I have on an Easy Scan is URI at 37.  If the PP formula is looking back over ten days, then why would a value such as 37 for URI, exceed 10?

Because it is using the alternate definition where it is looking at x days instead of 10 days and returning x.

So, it's looking at 63 days?

Yes, it maxes out at 63 bars.

Bruce

What the diff between your original PCF on the PP vs teh one you posted on Thursday, August 24, 2017 1:57:05 PM for Traderlady 

It checked for there being a PP today and not being a PP yesterday. Otherwise it returns zero.

I see thx

In TC is there anyway I can plot the last value in a diff color than the scale itself? 

I plot the PP count on its own scale overlayed with Price so the indicator has its own scale in white and the last value is in while as well. I like to change that

No, there isn't a way to change it like in StockFinder.

ok thx

Is this a shorter version of PP PCF which all i need to do is to change the last vlaue of 10 for diff period PP 

(C > C1 AND V > MAX(ABS(C1 < C2) * V1, 10))

originally you wrote as this 

C > C1 AND V > ABS(C1 < C2) * V1 AND V > ABS(C2 < C3) * V2 AND V > ABS(C3 < C4) * V3 AND V > ABS(C4 < C5) * V4 AND V > ABS(C5 < C6) * V5 AND V > ABS(C6 < C7) * V6 AND V > ABS(C7 < C8) * V7 AND V > ABS(C8 < C9) * V8 AND V > ABS(C9 < C10) * V9 AND V > ABS(C10 < C11) * V10

The short versions only works in TC2000 v17 and is a shorter version of the longer formula which will work in earlier versions as well.

You can just change the 10 in the shorter formula to adjust how many bars it looks back to confirm it as a Pocket Pivot.

Got it thx

I would love to see them add a Volatility Stop as VST or something in PCF so we can just reference it in a formula

Just like ATR now calculates ATR and you donlt need to write the entire formula they should add other indicators as well  

Thank you for your suggestion.

Bruce,

Below is the PP PCF I have 

L / ABS(C > C1 AND V > MAX(ABS(C1 < C2) * V1, 10))

Now I like to add a few more pieces 

(Price needs to close up 0.33 * ATR22 and also 0.33%

and

Volume surge > AvgV30 

L / ABS(C >= C1 + 0.33 * ATR22 AND C / C1 >= 1.033 AND V > AVGV30 AND V > MAX(ABS(C1 < C2) * V1, 10))

Am I correct here 

The 1.033 in your formula is 3.3%. If you want 0.33%, you would want to use 1.0033 instead.

Oh yea thanks 

Bruce I also like to add C >= L + 0.50 * ATR22 AND C / L >= 1.0050 so the stock will screen through if Either one of these two are correct in the PP PCF

C >= C1 + 0.33 * ATR22 AND C / C1 >= 1.0033

OR 

C >= L + 0.50 * ATR22 AND C / L >= 1.0050 

Am I correct on below 

L / ABS((C >= C1 + 0.33 * ATR22 AND C / C1 >= 1.0033 OR C >= L + 0.50 * ATR22 AND C / L >= 1.0050) AND V > AVGV30 AND V > MAX(ABS(C1 < C2) * V1, 10))

Either price is up from yesterday's close by 0.33 ATR and 0.33% or price is up from todays low by 0.5 ATR and 0.5%  

You need more parentheses because OR comes before AND in the order of operations.

L / ABS(((C >= C1 + 0.33 * ATR22 AND C / C1 >= 1.0033) OR (C >= L + 0.50 * ATR22 AND C / L >= 1.0050)) AND V > AVGV30 AND V > MAX(ABS(C1 < C2) * V1, 10))

ok thanks 

How do I adjust the PP Count PCF below that you wrote to make all the changes that we made above 

Maybe the following?

IIF(((C >= C1 + .33 * ATR22 AND C >= 1.0033 * C1) OR (C >= L + .5 * ATR22 AND C >= 1.005 * L)) AND V > AVGV30, IIF(C1 < C2 AND V <= V1, 0, IIF(C2 < C3 AND V <= V2, 1, IIF(C3 < C4 AND V <= V3, 2, IIF(C4 < C5 AND V <= V4, 3, IIF(C5 < C6 AND V <= V5, 4, IIF(C6 < C7 AND V <= V6, 5, IIF(C7 < C8 AND V <= V7, 6, IIF(C8 < C9 AND V <= V8, 7, IIF(C9 < C10 AND V <= V9, 8, IIF(C10 < C11 AND V <= V10, 9, IIF(C11 < C12 AND V <= V11, 10, IIF(C12 < C13 AND V <= V12, 11, IIF(C13 < C14 AND V <= V13, 12, IIF(C14 < C15 AND V <= V14, 13, IIF(C15 < C16 AND V <= V15, 14, IIF(C16 < C17 AND V <= V16, 15, IIF(C17 < C18 AND V <= V17, 16, IIF(C18 < C19 AND V <= V18, 17, IIF(C19 < C20 AND V <= V19, 18, IIF(C20 < C21 AND V <= V20, 19, IIF(C21 < C22 AND V <= V21, 20, IIF(C22 < C23 AND V <= V22, 21, IIF(C23 < C24 AND V <= V23, 22, IIF(C24 < C25 AND V <= V24, 23, IIF(C25 < C26 AND V <= V25, 24, IIF(C26 < C27 AND V <= V26, 25, IIF(C27 < C28 AND V <= V27, 26, IIF(C28 < C29 AND V <= V28, 27, IIF(C29 < C30 AND V <= V29, 28, IIF(C30 < C31 AND V <= V30, 29, IIF(C31 < C32 AND V <= V31, 30, IIF(C32 < C33 AND V <= V32, 31, IIF(C33 < C34 AND V <= V33, 32, IIF(C34 < C35 AND V <= V34, 33, IIF(C35 < C36 AND V <= V35, 34, IIF(C36 < C37 AND V <= V36, 35, IIF(C37 < C38 AND V <= V37, 36, IIF(C38 < C39 AND V <= V38, 37, IIF(C39 < C40 AND V <= V39, 38, IIF(C40 < C41 AND V <= V40, 39, IIF(C41 < C42 AND V <= V41, 40, IIF(C42 < C43 AND V <= V42, 41, IIF(C43 < C44 AND V <= V43, 42, IIF(C44 < C45 AND V <= V44, 43, IIF(C45 < C46 AND V <= V45, 44, IIF(C46 < C47 AND V <= V46, 45, IIF(C47 < C48 AND V <= V47, 46, IIF(C48 < C49 AND V <= V48, 47, IIF(C49 < C50 AND V <= V49, 48, IIF(C50 < C51 AND V <= V50, 49, IIF(C51 < C52 AND V <= V51, 50, IIF(C52 < C53 AND V <= V52, 51, IIF(C53 < C54 AND V <= V53, 52, IIF(C54 < C55 AND V <= V54, 53, IIF(C55 < C56 AND V <= V55, 54, IIF(C56 < C57 AND V <= V56, 55, IIF(C57 < C58 AND V <= V57, 56, IIF(C58 < C59 AND V <= V58, 57, IIF(C59 < C60 AND V <= V59, 58, IIF(C60 < C61 AND V <= V60, 59, IIF(C61 < C62 AND V <= V61, 60, IIF(C62 < C63 AND V <= V62, 61, IIF(C63 < C64 AND V <= V63, 62, 63))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))))), 0)

Thanks 

I tried to create a condition with the PCF below and it say the pcf doesn't return a boolean result 

My goal is to screen for stocks or use it as a wacthlist column so it would show a checl mark when the condition is true  

L / ABS(((C >= C1 + 0.33 * ATR22 AND C / C1 >= 1.0033) OR (C >= L + 0.50 * ATR22 AND C / L >= 1.0050)) AND V > AVGV30 AND V > MAX(ABS(C1 < C2) * V1, 10))

The Boolean portion is inside the ABS() function.

(C >= C1 + 0.33 * ATR22 AND C / C1 >= 1.0033) OR (C >= L + 0.50 * ATR22 AND C / L >= 1.0050)) AND V > AVGV30 AND V > MAX(ABS(C1 < C2) * V1, 10)

The rest of the formula is just there to get it to plot a dot at L.

Bruce, 

Just like the PP count indicator above I need a pcf that plots the count of the number of days that today's volume is higher than in the last 63 days 

The pcf needs to plot it only on up days and if todays vol is higer than all volume days (Up and Down Days) in the last 25 then the indicator will plot 25 if higher than last 42 then it will plot 42. Just like the PP Count indicator it should go up to 63 

The current PP Count is comparing the today's vol vs the vol of the down days. this new pcf should compare todays vol vs all days 

thx 

Please try the following.

IIF(C > C1, ABS(V > V1) - (V > V2) - (V > V3) - (V > V4) - (V > V5) - (V > V6) - (V > V7) - (V > V8) - (V > V9) - (V > V10) - (V > V11) - (V > V12) - (V > V13) - (V > V14) - (V > V15) - (V > V16) - (V > V17) - (V > V18) - (V > V19) - (V > V20) - (V > V21) - (V > V22) - (V > V23) - (V > V24) - (V > V25) - (V > V26) - (V > V27) - (V > V28) - (V > V29) - (V > V30) - (V > V31) - (V > V32) - (V > V33) - (V > V34) - (V > V35) - (V > V36) - (V > V37) - (V > V38) - (V > V39) - (V > V40) - (V > V41) - (V > V42) - (V > V43) - (V > V44) - (V > V45) - (V > V46) - (V > V47) - (V > V48) - (V > V49) - (V > V50) - (V > V51) - (V > V52) - (V > V53) - (V > V54) - (V > V55) - (V > V56) - (V > V57) - (V > V58) - (V > V59) - (V > V60) - (V > V61) - (V > V62) - (V > V63), 1 / 0)