Hi

can you help me please to create formula: 

Do not include in result  of scanning if  Chaclin Money Flow 1 (current) > 0 and prrevios > 0

I am using 30 min time interval

This would mean you are looking for symbols where the current or previous 1-Period CMF is less than or equal to 0. You would set the Time Frame of the following Condition Formula to 30-Minutes:

2 * C <= H + L OR 2 * C1 <= H1 + L1

Chaikin Money Flow
Chaikin Money Flow Indicator

Hi Bruce

Let me clarify what i need:

Currrent CMF(1) can be > 0   or  CMF(1) previous  can be greater 0

I do not need condition 'and'

Time interval - 30 min.

Thanks

That is completely different from the previous request. Please try the following instead:

2 * C > H + L OR 2 * C1 > H1 + L1

Hi. Can you please provide a formula for

Aroon (parameter is 1) , time interval is 30 min.  I need 1 bar back and 2 bar back. thanks

The Up value of a 1-Period Aroon indicator could be written as:

100 * ABS(H = MAXH2)

The Down value of a 1-Period Aroon indicator could be written as:

100 * ABS(L = MINL2)

A 1-Period Aroon Oscillator indicator could be written as:

100 * ((L = MINL2) - (H = MAXH2))

The value 1-bar back involves adding 1 to all of the bars ago parameters. So Up would be:

100 * ABS(H1 = MAXH2.1)

Down would be:

100 * ABS(L1 = MINL2.1)

And the Oscillator would be:

100 * ((L1 = MINL2.1) - (H1 = MAXH2.1))

The value from 2-bars back involves incrementing the bars ago parameters again. So Up would be:

100 * ABS(H2 = MAXH2.2)

Down would be:

100 * ABS(L2 = MINL2.2)

And the Oscillator would be:

100 * ((L2 = MINL2.2) - (H2 = MAXH2.2))

You can set the Time Frame of the Indicator Formula by adjusting the Time Frame drop-down menu when you create or edit the formula. You can also set the Time Frame in most places where you would use a formula such as when the formula is used in a WatchList Column or EasyScan.