Welcome Guest, please sign in to participate in a discussion. | Search | Active Topics | |
Registered User Joined: 11/7/2009 Posts: 25
|
Like to create a scannable condition when momentum graph crosses up through the zero line - what is the "computerese" for his condition?Thanksffarron
|
|
Administration
Joined: 9/30/2004 Posts: 9,187
|
Just right-click on the indicator and select Create Condition. Set the condition to Crossing up through Value, and set the value to 0.
|
|
Registered User Joined: 11/7/2009 Posts: 25
|
QUOTE (StockGuy) Just right-click on the indicator and select Create Condition. Set the condition to Crossing up through Value, and set the value to 0.
Thank you. It does not quite work yet - after I select "crossing up through value"
my prompt reads" Up through" I put in 0.00
next prompt is "passing" - box - of last - box - bar(s);
I put "2" in the first box and 2 in the second box. meaning I would like to see two bars above zero before it is selected.
Than I asked the system to scan with those parameters, but what came up did not exhibit the parameters requested.
Can ou help?
thank you,
ffarron
|
|
Worden Trainer
Joined: 10/7/2004 Posts: 65,138
|
ffarron,
You can be above zero for 2 out of 2 Bars, but you cannot cross-up through zero for 2 out of 2 Bars as it is impossible to cross-up through zero when you are already above zero.
You could create a Condition for being above zero for 2 out of 2 Bars and a second Conditon for being below zero for 1 out of 3 Bars. If you Drag and Drop these Conditions onto each other and create a Combo Condition with an And between the Conditions, the result would be Condition for being above zero for exactly 2-Bars.
Creating Conditions
-Bruce Personal Criteria Formulas TC2000 Support Articles
|
|
Guest-1 |