Registered User
Joined: 4/22/2010
Posts: 2
|
where is the button for this ?
|
Worden Trainer
Joined: 10/7/2004
Posts: 65,138
|
In TC2000 version 12, the data is downloaded automatically throughout the day.
If you right-click on the WatchList Column Header and select Edit, you can adjust the Refresh Rate. As long as it is not set to Manual, it should re-calculate the displayed values periodically. You can right-click on the WatchList Column Header and select Refresh Column to force an earlier re-calculation.
It is not possible to set a Sort to automatically re-run in TC2000 version 12. You need to select Re-Sort near the bottom right-hand corner of the WatchList or right-click on the WatchList Column Header and select Refresh Sort to force it to re-run. While it is possible to right-click on the WatchList Column Header for a Sort and select Edit to adjust the Refresh Rate, this only adjusts the frequency at which the visible values in the WatchList change their values. It does not actually force the Sort to re-run.
It is not possible to set a Scan to automatically re-run in TC2000 version 12. You need to select Edit Scan (where it says x min ago) and choose Scan to force the Scan to re-run.
In TC2000 version 7, you can select Databank RealTime Settings to automatically connect to Realtime data if you have Platinum service. You can update the 20-minute delayed daily data by selecting Databank | Update via Internet | Update.
Personal Criteria Formulas can be set to automatically update when the 20-minute delayed daily data is updated or you can manually update them by selecting Databank | Personal Criteria Formulas | Update All Criteria.
EasyScans are automatically as updated as your Personal Criteria Formulas.
-Bruce
Personal Criteria Formulas
TC2000 Support Articles
|