Registered User Joined: 8/23/2013 Posts: 245
|
When viewing Manage Drawings on... and you find a trendline that shows anchors as follows
CP Time-Frame: 10 Minute
From 4/2/2015 1:10 PM - 185.21
To 4/2/2015 2:20 PM - 185.07
Then is set Extend Right
So when drawing a trendline this is what is created and then when you set alerts the result of the alert are created by following this trendline as it extends from these Anchor Points (the TC2000 is not monitoring the actual trendline - it is monitoring the virtual trendline
I HAVE been able to create virtual Anchored VWAP by identifying my Anchor point using this setup --- >>>>>>> C4 < C5 AND H5 = MAXH26.5 <------- then I can scan the crossover with somthing like the below formula
(C4 < C5 AND H5 = MAXH26.5 AND C > ( (V*(O + H + L + C)/4) + (V1*(O1 + H1 + L1 + C1)/4) + (V2*(O2 + H2 + L2 + C2)/4) + (V3*(O3 + H3 + L3 + C3)/4) + (V4*(O4 + H4 + L4 + C4)/4) + (V5*(O5 + H5 + L5 + C5)/4) ) / 6 / AVGV6 AND O < ( (V*(O + H + L + C)/4) + (V1*(O1 + H1 + L1 + C1)/4) + (V2*(O2 + H2 + L2 + C2)/4) + (V3*(O3 + H3 + L3 + C3)/4) + (V4*(O4 + H4 + L4 + C4)/4) + (V5*(O5 + H5 + L5 + C5)/4) ) / 6 / AVGV6 AND O1 < ((V1*(O1 + H1 + L1 + C1)/4) + (V2*(O2 + H2 + L2 + C2)/4) + (V3*(O3 + H3 + L3 + C3)/4) + (V4*(O4 + H4 + L4 + C4)/4) + (V5*(O5 + H5 + L5 + C5)/4) ) / 5 / AVGV5.1 AND C2 < ((V1*(O1 + H1 + L1 + C1)/4) + (V2*(O2 + H2 + L2 + C2)/4) + (V3*(O3 + H3 + L3 + C3)/4) + (V4*(O4 + H4 + L4 + C4)/4) + (V5*(O5 + H5 + L5 + C5)/4) ) / 5 / AVGV5.1 )
So using the same basics: C11 < C12 AND H12 = MAXH5.12 AND C11 < C12 AND H12 = MAXH10.12 on a trendline this reference would be the "From" BEGINS or Anchors here
How can i say "From" anchors here OR " To " anchors here and of course ONCE the 2 pioints are identified would need to say "extends right"
Thanks
|