Registered User Joined: 5/17/2017 Posts: 10

Telechart 2000v7
I added the Stochastic 8.3.3 to my Telechart. I then created a PCF to scan for any stock that has a Stochastic of 8.3.3 Value of Less Than 40, using this PCF STOC8.3.3 < 40
I then tested the formula with EWP and the result was 30.75 < 40.00 TRUE
All good so far. HOWEVER, when I look at the actual Telechart and hover over today, I get a reading of:
Stochastics 8,3,3 46.75
When I go to another program and look at the Stochastic8.3.3 on their chart I get a 39.4917.
So, I'm pretty confused as to which one is the correct Stochastic 8.3.3 for EWP after Market Close on 5/18/2017 and if I need to do something to fix my PCF.
Any help would be greatly appreciated!
Thanks for the time!

Worden Trainer
Joined: 10/7/2004 Posts: 61,599

STOC8.3.3 is the simple stochastic 8,3 SK from 3 bars ago.
The formula for a simple stochastic 8,3 SK for the current bar would be the following (you would need to set the SD Period to 1 to display this value in the pointer mode data box).
STOC8.3
The formula for the simple stochastiic 8,3,3 SD for the current bar would be the following (this is the value being returned when displaying the value of the stochastic in the pointer mode data box).
AVG(STOC8.3, 3)
Bruce Personal Criteria Formulas TC2000 Support Articles

Registered User Joined: 5/17/2017 Posts: 10

QUOTE (Bruce_L)
STOC8.3.3 is the simple stochastic 8,3 SK from 3 bars ago.
The formula for a simple stochastic 8,3 SK for the current bar would be the following (you would need to set the SD Period to 1 to display this value in the pointer mode data box).
STOC8.3
The formula for the simple stochastiic 8,3,3 SD for the current bar would be the following (this is the value being returned when displaying the value of the stochastic in the pointer mode data box).
AVG(STOC8.3, 3)
Thanks for getting back to me Bruce! So, this is probably a dumb question, but how to I determine the %k from the 8.3.3 simple stochastic?

Registered User Joined: 5/17/2017 Posts: 10

Or clarifying that question is  How do I display the %k on the chart AND How to do a search with a PCF on the %k using the simple stochastic 8.3.3

Worden Trainer
Joined: 10/7/2004 Posts: 61,599

I tried to point out both of those things in my original response, but apparently not very well.
If you have the SD period set to something greater than 1, then both the SK and SD will plot on the chart in TC2000 v7, but only the value of the SD will be displayed in the pointer mode data box.
If you want the SK to displayed in the pointer mode data box in TC2000 v7, you need to set the SD period to 1. This will then not plot the SD (or more accurately it will plot the SD exactly on top of the SK). You could then manually add a moving average to the SK in order to have an SD plotted (and reported in the pointer mode data box).
Note the above assumes the stochastic is plotted in the top pane as that is the only pane from which values get displayed in the pointer mode data box in TC2000 v7.
The value of the simple stochastic 8,3 SK is the following.
STOC8.3
Note that the second 3 in a simple stochastic 8,3,3 SD is the period of the SD and is not involved in the calculation of the SK at all. So the formula for the SD in this case would be the following.
AVG(STOC8.3, 3)
Bruce Personal Criteria Formulas TC2000 Support Articles

Registered User Joined: 5/17/2017 Posts: 10

Thank you for that answer. I think it was more a product of my misunderstanding, than your explanation, as now I understand and looking back at your first response it now makes sense.
Thanks for the help!

Worden Trainer
Joined: 10/7/2004 Posts: 61,599

You're welcome.
Bruce Personal Criteria Formulas TC2000 Support Articles
